InSpec HA

InSpec HA

Description | General Guidance | Benefits | Technical User Information | Fact Sheets | Purchase Information


InSpec™ HA is a sterile disinfectant preparation of Hypochlorous Acid. InSpec™ HA is a fully effective filtered biocide, leaving very low residue and emitting very little odour in comparison to others on the market. Manufactured to GMP in an ISO 6 cleanroom, the product is filled and capped in an ISO class 5 environment. InSpec™ HA solutions are filled aseptically through a 0.2 micron filter into sterile packaging to ensure the optimum quality of the product. InSpec™comes with a validated shelf life. Trigger Spray formats protect contents from “suck back”, extending in-use shelf life.

InSpec™ HA is a fully validated solution and has been tested against EN1276, EN1650, EN13697 and EN13704. InSpec™ HA is designed for cleanroom and pharmaceutical industry use. When used as directed, HA will not affect or damage any materials associated as cleanroom materials or equipment. All formats of InSpec™ HA available are non-hazardous. InSpec™ HA is a perfect biocidal cleanroom rotational partner for InSpec™ QT.

General Guidance

  • Use Instructions: InSpec™ HA is designed for spraying, wiping and mopping applications. Hold spray approximately 15cm to 20cm from area to be treated. Pour 5L versions into an appropriate bucket for mopping.  Apply to surface to ensure complete coverage. Allow sufficient wet contact time before proceeding.
  • Appearance: Water white clear liquid free from insoluble. Characteristic mild odour. pH 6.0. This data is typical of normal production and should not be taken as a specification.
  • Storage: Store upright in original closed containers, away from sunlight and extremes of temperature. Full guidance on the handling and disposal of this product is provided in a separate Safety Data Sheet (SDS).
  • Safe Handling: Always wear gloves and goggles or face protection. Always read the label and SDS before use.
  • Material Compatibility: Application of solutions, when used as directed, will not affect materials normally encountered in the cleanroom. See compatibility information in the Technical File.


  • Hypochlorous acid shares some of the chemical properties of hypochlorites, but none of the negative aspects.
  • One of the safest and fully effective full spectrum biocides.
  • Very low residue.
  • Low corrosion, low odour.
  • Tested according to EN1276, EN1650, EN13697 and EN13704.
  • Validated in-use shelf life. Contents protected from “suck back” in 1 Litre trigger spray formats.
  • Multiple bagged.
  • Ideal rotational partner for InSpec™ QT.
  • Made to GMP standards.
  • All formats are non-hazardous.
  • Stabilised solution – 12 months shelf life.

Technical User Information

  • InSpec™ HA is a sterile disinfectant in pre-diluted and concentrated formats.
  • Pre-diluted formats use WFI quality water.
  • InSpec™ HA is manufactured to GMP in an ISO 6 cleanroom. The product is filled and capped in an ISO class 5 environment.
  • The solution is filtered aseptically through a 0.2 micron filter into sterile packaging.
  • InSpec™ HA comes with key certification such as irradiation, sterility and analysis.
  • Trigger spray has a validated 3 month in-use shelf life.
  • For 5L screw cap bottles use the entire contents after opening.
  • Hypochlorous acid is made by the electrolysis of brine.
  • Hypochlorous acid offers low corrosion and low odour. It is very safe to handle and leaves little residue, yet remains a potent agent.

Fact Sheets


Purchase information




6 x 1Ltr Trigger Spray bottles/case